Duotone Back Wing Stabiliser PX
Duotone's PX back wing stabiliser — a reprofiled twist that sharpens pitch control, pumping and manoeuvrability, in 160, 175 and 195.
The Duotone Back Wing Stabiliser PX is the rear foil stabiliser that replaces Duotone's previous P range. The stabs look almost identical; the only thing Duotone changed is the twist in the profile, from the root chord to the tips. Small as that sounds, their team found it improved just about every aspect of the P — so this is the one to fit if you want more from the back of your foil without changing anything else in the setup.
- Reprofiled twist, root chord to tips — Duotone report better pitch control, more manoeuvrability and improved pumping, so the foil turns more willingly and is easier to keep up on the plane.
- Slightly smaller surface area than the old P — expect a little less front foot pressure moving across from a P stab, so you can ride in a more neutral stance rather than driving the nose down.
- Three sizes from 160 to 195 — the larger the stab, the more pitch stability and lift at low speed, so you can tune the tail to suit your front wing, your weight and the conditions you actually sail in.
Specifications
| Size | Surface area | Screws | Recommended torque |
|---|---|---|---|
| PX 160 | 160 cm² / 24.8 in² | 2× M6×16 | 10 Nm |
| PX 175 | 175 cm² / 27.1 in² | 2× M6×16 | 10 Nm |
| PX 195 | 195 cm² / 30.2 in² | 2× M6×16 | 10 Nm |
| Replaces | PX160 replaces P165 · PX175 replaces P180 · PX195 replaces P200 | ||
| Item number | 42260-3847 | ||
| Construction | Duotone do not publish a construction material for this stabiliser | ||
Frequently asked questions
Which size should I go for?
As a rule, the bigger the stab the more pitch stability and low-speed lift you get, and the smaller it is the looser the foil feels. The 195 is the most forgiving of the three, the 160 the most free. If you're coming off a P stab, Duotone's direct swaps are PX160 for P165, PX175 for P180 and PX195 for P200.
I'm moving from a P stab — what will actually feel different?
Duotone say to expect a little less front foot pressure, because the PX sizes carry slightly less surface area than the P equivalents. Alongside that, the reprofiled twist is there to give better pitch control, more manoeuvrability and improved pumping.
Which front wings does it work with?
Duotone say the PX pairs perfectly with their Carve 3.0 range, and can also be used with Glide, Glide 2.0, Carve and Whizz front wings. They pitch it particularly at improving general foil performance for high-speed winging and kitefoiling, and for tackling bigger, faster waves.
How is it fitted?
It mounts with two M6×16 screws, and Duotone's recommended torque is 10 Nm. Use a torque driver if you have one — foil hardware is easy to over-tighten, and that is where threads get damaged.
Is this the same as the Back Wing Stabilizer PX (OG)?
No, and it's worth knowing before you order. The PX (OG) is a separate, entry-level stab that Duotone only make in 225 and 260. This page is the performance PX, item number 42260-3847, in 160, 175 and 195.
How should I look after it?
Rinse it with fresh water after every session, salt or not, and dry it before it goes back in the bag. Check the screws before you go out — a stab working loose mid-session is the quickest way to lose one.
More in Wing Foil Parts & Accessories and Kite Foiling.
Not sure which size suits your foil? Have a look round the Board-Worx shop, then chat to the Board-Worx team or grab yours online.